代写COMP 250、代做java编程语言

项目预算：开发周期：发布时间：要求地区：

Final Project
COMP 250 Fall 2024
posted: Wednesday, Dec. 4, 2024
due: Sunday Dec. 15, 2024, at 23:59 for a chance to receive Mastery, OR
Friday, Dec. 20, 2024 at 23:59
General Instructions
• Submission instructions
– Please note that the submission deadline for the ffnal project is very strict. No submissions
will be accepted after the deadline of Dec 20th. And no submissions received after Dec. 15
will receive Mastery.
– We encourage you to start early. As always you can submit your code multiple times (submissions
will be capped at 100) but only the latest submission will be kept. We encourage you to submit
a ffrst version a few days before the deadline (computer crashes do happen and code post
may be overloaded during rush hours).
– Your task is to complete and submit the following ffle:
* DesertTile.java
* FacilityTile.java
* MetroTile.java
* MountainTile.java
* PlainTile.java
* ZombieInfectedRuinTile.java
* Graph.java
* GraphTraversal.java
* TilePriorityQ.java
* PathFindingService.java
* ShortestPath.java
* FastestPath.java
* SafestShortestPath.java
Do not submit any other ffles, especially .class ffles. Any deviation from these requirements
may lead to lost marks.
– Do not change any of the starter code that is given to you. Add code only where instructed,
namely in the “ADD YOUR CODE HERE” block. You may add private helper methods to
the class you have to submit (and in fact you are highly encouraged to do so), but you are not
allowed to modify any other class.
1• The project shall be graded automatically. Requests to evaluate the project manually shall not be
entertained, so please make sure that you follow the instruction closely or your code may fail to pass
the automatic tests. Note also that for this project, you are NOT allowed to import any other class
(all import statements other than the one provided in the starter code will be removed). Any failure
to comply with these rules will give you an automatic Inconclusive.
• Whenever you submit your ffles to Ed, you will see the results of certain exposed tests along with
the competency level you have achieved. A small subset of these tests will also be shared with you
to help with debugging. We highly encourage you to write your own tests and thoroughly test your
code before submitting your ffnal version. Learning to test and debug your code is a fundamental
skill to develop.
You are welcome to share your tester code with other students on Ed and collaborate with others in
developing it.
• Your submission will receive an “Inconclusive” if the code does not compile.
• Failure to comply with any of these rules may result in penalties. If something is unclear, it is your
responsibility to seek clariffcation, either by asking during offfce hours or posting your question on
the Ed.
• IMPORTANT: Do NOT wait until you have ffnished writing the entire project to start testing your
code. Debugging will be extremely difffcult if you do so If you need help with debugging, feel free
to reach out to the teaching staff. When asking for help, be sure to mention the following:
– The bug you are trying to ffx.
– What steps have already taken to resolve it.
– where you have isolated the error.
Learning Objectives
This project provides an opportunity to practice working with graphs and tackle practical problems involving
graph traversal and pathffnding. Unlike previous assignments, this project offers greater ffexibility in
your implementation choices, allowing you to exercise creativity and decision making to solve complex
tasks.
Through this project, you will:
1. Implement both Depth-First Search (DFS) and Breadth-First Search (BFS) algorithms to explore
and analyze graphs.
2. Construct two essential data structures, a weighted graph and a priority queue, using object-oriented
principles.
3. Develop a functional implementation of Dijkstra’s algorithm to ffnd the shortest path on a positively
weighted graph.
The skills gained in this project will prepare you for deeper explorations in graph algorithms and
optimization in COMP 251, while reinforcing core concepts of data structures and algorithms.
2Project set up
For this project, you can use a GUI (provided) that is programmed in JavaFX, so you need to set up JavaFX
in your IDE properly. Please note, that the use of the GUI is not necessary to successfully complete the
project.
• For Intellij user (recommended):
– Windows user: It should be already included in the SDK if you are using Java 1.8 or higher.
– Mac user: By default you laptop might be using Amazom Correto distribution, you need to
change it to Liberica distribution to support media.
1. open File → Project Structure → SDKs → Add → Download new SDKs → Select Liberica
and install it
2. In your run conffguration, select Liberica as your build SDK and build the project
• For Eclipse user:
– Windows user: You need to install JavaFX library manually
1. In Help menu, in Install new software wizzard you should add the new site location to
ffnd proper software. Use ”Add” button, then in ”name” section type ”e(fx)clipse (or anything
you want, it does not matter). In ”location” section type: https://download.
eclipse.org/efxclipse/updates-nightly/site/
2. Search downloadable package by applying a fflter ”e(fx)clipse” you should see a list of
options (such as JavaFX SDK)
3. Install them all, after that Eclipse will restart
4. In Eclipse select the project, run Project → Preferences → Java Build Path → Add Library
→ Select JavaFX SDK, then rebuild the project, all errors should go away
– Mac user: switch to Intellij
3Introduction
Figure 1: Referred from [1]
In a not-so-distant future, a zombie apocalypse has ravaged the planet, leaving resources scarce. A few
years post-apocalypse, mother nature has reclaimed much of the world, covering it in lush greenery. Cities
have turned to ruins, serving as hubs for zombies to hide during the day while they roam and hunt for new
ffesh at night. Resource-gathering time is limited, and over the years, the use of technology has dwindled
to a select few who are still capable.
You are among these rare survivors - one of the few still capable of programming. Luckily, one of
the elders has entrusted you with a critical mission: to create an app that will help humanity scavenge
resources while avoiding the zombie threat. The responsibility now lies on your shoulders, as this app
could be a turning point for humanity in its ffght for survival.
Thankfully, you do not need to start from scratch. While exploring an old computer, you stumbled upon
a map app that provides a simple graphical interface (GUI). However, the core functionalities of the app
have been corrupted, and it is now up to you to restore and complete them to ensure its full functionality.
Pathffnding from Your Infected House to a Safe House
Your main task in coding this app is to account for all the different elements of nature, such as deserts,
mountains, and more, to devise a plan to safely travel to the safe house.
4On your journey, you may need to gather supplies, navigate through metro stations, and even face off
against pesky zombies. Successfully computing the best route to the safe house will ensure that the risk of
venturing out is calculated and worthwhile.
Now hurry up and get to coding before the zombies come knocking on your door!
GUI
Luckily for you, the GUI of the app is still functional and consists of the following sections:
• Menu: The menu provides options to navigate through maps and supports functionalities to modify
the GUI visual output:
– Control: Basic commands to manipulate the map.
– Maps: Options to initialize maps.
– View: Utility functions related to map display:
* Display system log: A toggle to show or hide the system log.
* Display tile text: A toggle to show or hide text for each tile in the map.
* Display grid: A toggle to show or hide grid borders.
• Main map display: Displays different parts of the city in a 2D grid-based format. This section
shows the layout of the map, the departure and destination points, and any suggested paths.
• Commanding panel: This section allows users to issue commands based on their needs. Your main
task is to write the code for each button and ensure their correct functionality.
• Console panel: Displays important messages, including system and user-generated messages.
Figure 2: GUI
5Map
The map is designed as a 2D grid for easy visualization and demonstration. It consists of six different base
regions: plains, deserts, mountains, facilities, metro tiles, and zombie-infected ruins. It also identifies the
locations of the departure and destination tiles.
Mountains are generally hard to cross and are treated as non-travelable obstacles. The other tiles can be
traversed, but each type incurs specific costs in terms of distance, time, and damage. For example:
• The desert region may offer a straightforward path that is short in distance but slow to travel on foot.
• Cutting through an abandoned building may provide a shorter and quicker route but poses a high
risk of encountering zombies.
In this project, you will model these regions as data and experiment with how the associated costs influence
your choice of pathfinding strategies.
(a) Plains (b) Building (c) Zombie (d) Mountains (e) Metro
(f) Desert
Figure 3: Different elements represented in the map[2, 3]
Printing to console
To use the function that shows a message on the GUI, try calling the logMessage() function from the
Logger class. You can use Logger to log messages with the following code:
Logger.getInstance().logMessage(msg:String)
The logger can be accessed anywhere.
6Simulating Your Travel
To ensure that the path devised by your logic is completely accurate, the app includes a functionality called
simulation. This feature allows you to simulate your path and visualize your journey.
To start a simulation, after successfully generating a path, press the simulation button from the Control
menu. Don’t forget to turn on the volume for some immersive sound effects!
Your Tasks
Level 0: Warming up
As the sun rises on the first day of your mission, you begin setting up the foundation for humanity’s survival.
The first step is mapping the world around you—a lush yet dangerous landscape with varied terrains.
Understanding the lay of the land is essential to plan safe travel routes and avoid perilous obstacles.
The outer world can be modeled using six regions, and your first task is to make sure that the data
related to those regions is correctly initializes. The GUI is provided the template for each region as Tile
and each specific tile would be a subclass of the Tile class.
The Tile class has several fields that can be accessed directly from all of the other classes:
• isDestination: A boolean variable indicating whether or not this tile is the destination.
• isStart: A boolean variable indicating whether or not this is the tile where our path begins.
• xCoord and yCoord: This tile’s x, y coordinates in the map, starting from top left. The row is x
and the column is y.
• nodeID: A unique index number for each tile object. The only assumption you can make about
this number is that it is unique. You can also modify it, if you like, as long as you keep it unique.
• adjacentTiles: An array list of all the tiles connected to this tile on the map.
• distanceCost, timeCost, and damageCost: The cost of travelling to this tile in terms of
distance, time, and physical damage respectively.
• predecessor, and costEstimate: two fields which you might find useful when implementing
Dijkstra’s algorithm.
Find all the subclasses representing each region inside the tiles folder, and complete their constructors
using the information from the table below:
name/cost distance time damage(risk)
plain 3 1 0
desert 2 6 3
mountain 100 100 100
facility 1 2 0
metro 1 1 2
zombie infected ruins 1 3 5
7To test that the costs have been initialized correctly, start GUI and open map 1. Each time you click on
an individual tile, the detailed information about that tile should be printed on the console. Fig 3 gives a
pictorial representation of different elements of nature which can be found in the GUI.
Level 1: Basic Pathfinding
With the map prepared, you set out to explore the area using basic strategies. Guided by your knowledge of
Depth-First and Breadth-First Search, you begin scouting paths to the safe house. Though these methods
are rudimentary, they lay the groundwork for your ultimate goal: devising an efficient route.
Open the GraphTraversal class and implement the following static methods:
• BFS(Tile start): This method takes a Tile as input, representing the starting point of the
traversal. It will traverse the map and find all reachable tiles from the given input tile using BFS. The
method should return an ArrayList containing the Tiles in the same order they were visited.
• DFS(Tile start): This method takes a Tile as input, representing the starting point of the
traversal. It will traverse the map and find all reachable tiles from the given input tile using DFS. The
method should return an ArrayList containing the Tiles in the same order they were visited.
NOTE: Some tiles are not designed to be traversable. Use the method isWalkable() from the Tile
class to filter out these obstacle tiles during your traversals.
Testing
To test the correctness of your implementation, open GUI and go to Map 1. Try clicking on BFS traversal
or DFS traversal. You should see a red dotted path that follows the order of visits and visit all reachable
tiles on the map. Fig 4 highlights the expected output for Map 1. Please note that depending on your
implementation of DFS, you might see a different path and that’s ok.
(a) BFS Traversal (b) DFS Traversal
Figure 4: A snapshot of Map 1 for BFS and DFS Traversal
When you work with larger maps, it might be hard to understand the order in which the tiles are reached
just by looking at the path drawn. Try opening [Control]→[Start Simulation] after executing the algorithm,
it may help you visualize the path better.
8Level 2: Building Weighted Graphs
The world is more complex than it seems. The straightforward traversal methods aren’t enough to navigate
this dangerous terrain efficiently. You turn to a better representation—a weighted graph—to capture the
intricacies of the terrain and prioritize paths with minimal risks.
Hence, you return to your trusted notes, and this time you discover a better algorithm for the task: Dijkstra’s
algorithm. You recall from class that this algorithm is used to find the shortest path from point A to
point B on a positively weighted graph. In a couple of sections, you’ll implement this algorithm yourself!
To prepare, you first need to consider how to implement the two data structures required by the algorithm.
Let’s begin by implementing a weighted graph. Open the class Graph. This class defines a data type to
represent a weighted graph. It is a directed graph where the cost of traveling between two tiles connected
by an edge is determined by the destination Tile. Specifically:
weight(Edge(t1, t2)) = cost(t2)
weight(Edge(t2, t1)) = cost(t1)
Depending on the graph you need to build, you will refer to the appropriate cost stored in the Tile object.
Your task is to implement this class to represent a map of the outer world, on which you will eventually
build paths with minimal weight. While the specific implementation details are left up to you, we require
you to implement at least the following methods (note that their headers must remain unchanged). You
are welcome to add as many fields and methods (public or private) as you see fit. You may also
overload the methods listed below if desired.
• Graph(ArrayList vertices): A constructor that builds the graph given a list containing
all of its vertices. This graph should NOT contain any edges. The constructor should be
used to initialize the vertices of the graph and any fields you decide to include in this class.
• addEdge(Tile origin, Tile destination, double weight): A method that adds
an Edge with the given weight, connecting origin to destination.
• getAllEdges(): A method that takes no inputs and returns an ArrayList containing all the
Edges from this graph.
• getNeighbors(Tile t): A method that takes a Tile as input and returns an ArrayList
containing all the Tiles connected to it in this graph.
• computePathCost(ArrayList path): This method takes as input a list of Tiles
representing a path. It computes and returns a double indicating the total weight of the path (i.e.,
the sum of weights for all edges along the path). You can assume that the input represents a valid
path in this graph.
Please note that inside the Graph class you can find a static nested class called Edge. This class
is meant to represent a directed edge connecting two Tiles in the graph. This class must contain the
following methods/fields (as with Graph you are welcome to add anything that you might find useful for
your own implementation):
• Three fields:
9– origin : a Tile indicating where the edge is originating from.
– destination : a Tile indicating where the edge is directed to.
– weight: a double indicating the weight associated to this edge.
• Edge(Tile s, Tile d, int cost): A constructor that uses the inputs to initialize an object
of type Edge.
• getStart() and getEnd(): two getters used to access the corresponding Tiles.
Testing
To be able to test your code for this section using the GUI, you will first need to implement Dijkstra’s
algorithm. You are encouraged to test your code on your own before moving forward.
Level 3: Priority Queue Construction
To navigate the ever-changing dangers of the world, prioritizing your moves is essential. By leveraging
your knowledge of heaps, you will construct a priority queue to dynamically evaluate and select the safest
and most efficient paths. This tool will be critical as you progress to more advanced strategies. Since
heaps are complete binary trees, you can take advantage of a clever trick you learned to implement the
entire data structure efficiently using an array.
Open the TilePriorityQ class. This class represents a priority queue where the elements are Tiles,
and they are compared based on the cost estimated to reach each tile from a source tile. Similar to the
Graph class, you have some flexibility in deciding how to implement the priority queue.
To earn full points for this task, you must implement the following methods. You are welcome to add any
additional fields and methods (public or private) that you find necessary. Overloading any of the
methods listed below is also permitted if it aligns with your design choices.
• TilePriorityQ (ArrayList vertices): a constructor that builds a priority queue
with the Tiles received as input.
• removeMin() a method that takes no inputs and removed the Tile with highest priority (i.e.
minimun estimate cost) from the queue.
• updateKeys(Tile t, Tile newPred, double newEstimate): a method that takes
as input a Tile t. If such tile belongs to the queue, the method updates which Tile is predicted
to be the predecessor of t in the minimum weight path that leads from a source tile to t as well as
the estimated cost for this path. Note that this information should be stored in the appropriate fields
from the Tile class, and after these updates, the queue should remained a valid min heap.
Testing
You are highly encouraged to test that your priority queue works as expected before starting to implement
the code from the next section.
10Level 4: Dijkstra’s Algorithm
Now equipped with the tools to dynamically assess paths, you are ready to implement Dijkstra’s algorithm—a
powerful technique for computing the shortest route to safety. Every decision you make brings
humanity one step closer to survival.
Open the PathFindingService class. This class contains the following public methods:
• A constructor that takes a Tile as input, representing the starting point of the paths we’d like to
compute.
• An abstract void method called generateGraph(). This method, which you’ll need to
override in the PathFindingService’s subclasses, is supposed to build a graph connecting all
reachable tiles (i.e. ignoring the obstacle tiles) from the source tile. It should then use this graph
to initialize the corresponding Graph field. This will be the graph on which our algorithm will
compute the path with a minimum weight.
In addition to the latter, there are the following three methods which will be discussed throughout the
next few sections. As with the previous two classes, you are welcome to add any additional method you
see fit.
• findPath(Tile startNode)
• findPath(Tile start, Tile end)
• findPath(Tile start, LinkedList waypoints)
You are finally ready to implement Dijkstra’s algorithm. You have been provided with a class named
ShortestPath that extends the
Complete the following tasks to get the shortest distance path
• Step 1: In ShortestPath, implement generateGraph(). The method creates a weighted
graph using the distance cost as weight. This graph should be then stored in the appropriate field.
To make sure that the graph is generated each time a ShortestPath object is created, you should
add a call to this method inside the constructor.
Note: You can use BFS or DFS to help you get a list of all reachable tiles. Remember also that the
graph you want to build should only connect tiles that are designed to be travelled through. You can
use the method isWalkable() to help you figure out which tiles are not just obstacles.
• Step 2: Implement Dijkstra’s algorithm in PathFindingService (Fig 5). Use the algorithm to
implement the findPath(Tile startNode) method. The method uses Dijkstra’s algorithm
on the Graph stored in the field g to find a minimum weight path to the destination from the
input Tile. Note that the result of running Dijkstra’s algorithm is that each node in the graph will
contain the information needed to find the minimum weight path from the source to this node. So,
after running the algorithm you will need to use the information stored in the predecessor field
to backtrack and find the list of Tiles that make up the path to be traversed from the start node to
the destination.
11DIJKSTRA(V, E,w,s):
INIT-SINGLE-SOURCE(V,s)
S ← Q ← V
while Q do
u ← REMOVE-MIN(Q)
S ← S {u}
for each vertex v Adj[u] do
RELAX(u,v,w)
Figure 5: Pseudo-code for Dijkstra’s algorithm
INIT-SINGLE-SOURCE(V,s)
for each v V do
d[v]←
[v]← null
d[s]← 0
Figure 6: Pseudo-code for the initialization
RELAX(u,v,w)
if d[v] > d[u]+w(u,v) then
d[v] ← d[u]+w(u,v)
[v] ← u
Figure 7: Pseudo-code for the relaxing operation
The reason why we are implementing the path-finding algorithm in the PathFindingService
class is that when later creating the second strategy for the time cost you would be using the same Dijkstra’s
algorithm so it is much cleaner to write the code in the parent class. However, you need to write
your own graph generation method in the subclass because it is essentially the difference between these
path-finding strategies.
Testing
To test this code, you can open either Map 1 or Map 2 and click on the button “Shortest Path”. A track
will be highlighted in red that will show you the shortest way to reach the safe house. You can click on the
Simulate button to simulate your path. Fig 8 highlights the expected output for both the maps (please note
that the shortest path is not unique. There might be more than one path with the same minimum weight!
Your code does not have to generate the same path as in the figure as long as its weight is minimal).
12(a) Map 1 (b) Map 2
Figure 8: Shortest path for both maps
Level 5: Waypoints
The journey is not just about reaching safety—survival also depends on gathering critical supplies along
the way. By integrating waypoints into your algorithm, you can account for these essential stops while
still optimizing the overall route.
The app includes a functionality called ”Add Waypoints”, allowing you to manually place waypoints using
the GUI. To place waypoints, click on the ”Add Waypoints” button and select supply locations on the map.
To accommodate these changes, you will need to modify the code by implementing the remaining two
findPath methods in the PathFindingService class. Follow these steps to complete the implementation:
•
Step 1: Implement the findPath method that takes the start and end Tiles as its input. This method
is very similar to the one implemented in Level 4. The only change would be to generate the path to
the specific destination tile received as input. For this purpose, notice that Dijkstra’s algorithm will
never visit each node in the graph (reachable from the source) exactly once. This means that once
a node has been visited by the algorithm, one is already able to figure out what is the shortest path
from the source to this node.
• Step 2: Implement the last and final findPath method, which takes a starting node and a list of
waypoints as input. This method builds the shortest paths from the source to the destination, making
sure to visit the each of the waypoints in the order in which they have been provided as input. Use
the other methods that you have already implemented to help you find such path. Please note that:
the destination tile will not be provided within the list of waypoints. You can figure out which one
is the destination tile by accessing the field isDestination from the Tile class.
13Testing
For testing this code, you can open Map 1 or Map 2. You can click on ”Add Waypoint” and add waypoints
anywhere on the map. Then, you can click on ”Shortest Path” to get a path traversing through your supply
pointa and going to the final destination. Fig 12 gives a graphical example of sample output. In the figure,
we have added two waypoints(W1, W2) and the path traverses through both of them.
(a) Shortest path with waypoints for Map 2 (b) Fastest path with waypoints for Map 2
Level 6: Fastest Path
Sometimes speed is more important than caution, especially at night when zombies are most active. You
adapt your tools to prioritize time efficiency, ensuring a swift escape in the darkest hours.
To find the fastest path, you are provided with a class called FastestPath that extends
PathFindingService. Thankfully, you have already implemented your algorithms to find a minimum
weight path inside PathFindingService, so all you need to do is generate a graph with the
appropriate weights, since in this case you want the algorithm to run on a graph that is weighted by the
time cost. Override generateGraph() in the class FastestPath (similarly to how you did before)
to achieve this.
Testing
To test the code, you can open Map 1, and Map 2 and click on the button ”Fastest Path”. The path should
be highlighted using a red line. You can simulate the path by going into [Control] →[Start Simulation], to
get a sense of the simulation. You can get a sense of the path by looking at the figure below.
14Figure 10: Expected output for the fastest path on Map 2
Level 7: Metro Integration
The ruins of the metro system offer a glimmer of hope for faster travel. By incorporating metro tiles into
your pathfinding algorithm, you leverage these remnants of technology to enhance your routes and outpace
the undead.
To integrate the subway in your logic, you would need to make a few modifications in your code. The
following are the steps to add the subway logic in your code
• You have been supplied with a class named MetroTile. You have already initialized a constructor
that declares all the variables. Your first task is to implement another method called fixMetro
that assigns different distance and time costs to metro tiles. This method takes a Tile as input.
If such tile is another metro tile, then the time and distance costs (i.e. metroTimeCost and
metroDistanceCost) to travel between these two tiles should be computed based on how far
the two tiles are. The following are the formulae for calculating the time and distance cost going
from one metro station to another:
metroT imeCost = M(t1, t2) ∗ metroCommuteF actor
metroDistanceCost = M(t1, t2)/metroCommuteF actor
where the metroCommuteFactor variable is set to 0.2 for now. M(t1, t2) is the Manhattan
distance between t1 and t2, use Tile class’s xCoord and yCoord to access their 2-D coordinate and
use the formula below:
M(t1, t2) = abs(t1.xCoord − t2.xCoord) + abs(t1.yCoord − t2.yCoord)
15Note that when adding more than 2 metro stations things are getting more complicated because each
pair of metro tiles would have their own cost based on the distance, so to simplify this you can
assume there are only two metro stations in the district (poor public transportation).
• Modify your code, so that the graph generated by generateGraph() in both FastestPath
and ShortestPath class now considers metro weights. That is, whenever you try to add an edge
to the graph, if both the start and the end tile for a edge are MetroTile, then you need to set the
edge’s weight/cost using the corresponding value computed in the previous step. Please note that
which part of the code you will need to modify really depends on your implementation.
Testing
To test this code, you can go to Map 3 and click on the ”Fastest Path” Button. A sample output has been
attached below.
Figure 11: Expected output after integrating metro in Fastest Path
Level 8: Safest Shortest Path
By now, you have implemented Dijkstra’s algorithm and developed two strategies: one for the shortest
distance and another for the fastest time. Despite these efforts, navigating zombie-infested areas remains
a deadly challenge, especially in high-risk districts like those in Map 4. These paths fail to guarantee the
safety of our people.
To address this issue, our post-apocalypse pathfinding service must incorporate a new feature that balances
safety with efficiency. To simulate and evaluate potential risks, agents now have a fixed health (HP) that
decreases when traveling through dangerous areas. If an agent’s HP drops below 0, the path must be
deemed invalid.
Your task is to develop a solution that finds the shortest path while ensuring the agent’s survival.
16This type of problem is called constrained shortest path (CSP) and you will need to implement an
algorithm that is known for solving this problem called LARAC (Lagrangian Relaxation Based Aggregated
Cost) algorithm. In simple words, the algorithm introduces aggregated cost to replace graph
cost (weight) and optimize it through iterations until it finds the optimal cost (weight) that satisfies the
constraint. To know more about the mathematical theory behind it, check out some resources here.
When you first began this project, you have set up various types of costs for each type of tile (region),
including damageCost, which hasn’t been used yet. The field damageCost represents how much
damage our agent takes when walking on this tile.
For this section, you need to complete the SafestShortestPath class which holds the logic for
computing the safest shortest path for our agent. This class has the following fields:
• A integer field health, model and visualize our agent’s life status.
• A Graph called costGraph that uses the distance cost as the edges’ weights.
• A Graph called damageGraph that uses the damage cost as the edges’ weights.
• A Graph called aggregatedGraph that u