代写CMPT 125、代做C++语言编程

项目预算：开发周期：发布时间：要求地区：

Assignment 4 CMPT 125 Intro. To Computing Science & Programming II Spring 2023
Page 1 of 6 © Victor Cheung, 2023
Assignment 4 (10% of Course Total)
Due date: 11:59pm, Dec 1 Dec 3, 2023
At least part of the assignment will be graded automatically. Make sure that your code compiles without
warnings/errors and produces the required output. Also use the file names and structures indicated as
requested. Deviation from that might result in 0 mark.
Your code MUST compile and run reasonably efficiently in the CSIL machines with the Makefile provided.
It is possible that even with warnings your code would compile. But this still indicates there is something
wrong with you code and you have to fix them, or marks will be deducted.
Your code MUST be readable and have reasonable documentation (comments) explaining what it does.
Use your own judgement, for example, no need to explain i += 2 is increasing i by 2, but explain how
variables are used to achieve something, what a certain loop is doing, and the purpose of each #include.
Description
There is only 1 question in this assignment. However, there are several files you need to submit. Write
your answer in the corresponding file as instructed along with your student information. While you still
can include any libraries that are covered in class, read the sections below to see how C++-compatible or
C++-specific versions should be used. You can also write your own helper functions. Only one of these files
should contain the main function.
Question 1 [16 marks]
In this question you are going to extend the program you made in Assignment 2&3 by providing more
functionalities. You are also again going to write your own main function so the program runs. In addition,
you are going to implement everything in C++.
Create a program that reads all the talk information from a file and provide an interface for the user to
query talk entries. Your program must support the following functionalities as options:
• Option 1: to load a talksfile – ask the user to input the name of the file containing talk information
and load the entries from that file (report # of entries). Note that the file can be non-existent (if
so the program should print the error and keep running with all subsequent choice of other option
asking the user to load a talks file), but if it exists you can assume the format inside that file is
consistent (duration, talk title, overview, ---), with each line having at most 300 characters. It is
possible for the user to load a different file by choosing this option again, which will replace the
previously loaded entries. You can assume the filename as at most 50 characters and has no space.
• Option 2: to list talks sorted by duration – list the talk entries from shortest to longest. If with the
same duration there are more than one talk entry, any order within that duration is acceptable.
• Option 3: to list talks sorted by title – list the talk entries sorted by title (as determined by strcmp).
If with the same title there are more than one talk entry, any order within that title is acceptable.
• Option 4: to lookup a talk – ask the user for a talk title for at most 50 characters (space included),
then report all entries containing the input as a substring. There can be more than one entry from
the file. The lookup is case-sensitive (i.e., “computer” and “Computer” are not the same).
o If one or more entries are found, print all the information. Any order is acceptable.
o If no entry is found, print “No such talk on record.”
Assignment 4 CMPT 125 Intro. To Computing Science & Programming II Spring 2023
Page 2 of 6 © Victor Cheung, 2023
You can assume the user will always enter at most 50 characters.
• Option 5: to add a talk – ask the user for all the information for a talk (duration, talk, overview)
and add it to the currently loaded entries. After adding, report and print “Entry added.”
o There is no need to check for duplicates. You can assume the input format is correct.
o Check for invalid duration: hours that are <0 and minutes/seconds that are <0 or >=60. If
that happens, inform the user and keep asking for a valid hours and minutes/seconds.
• Option 6: to save a talks file – ask the user to input the name of a file to which the current entries
will be saved in the same format as the sample files. It is possible for the name to be the same as
the file just being loaded. If so, it will be overwritten. Report # entries saved when done.
• Option 7: to terminate the program – thank the user and end the program.
Options 1-4&7 are basically the same as Assignment 3. Yet, there are also some differences. In particular,
since a vector is now used to store the talk entries, some functions that were defined in talklib previously
are now moved to better organize functions according to class definitions. Pay attention to the
provided .hpp files for details.
Your program must meet these requirements:
• Include the provided header file (.hpp file) and use the functions defined in the corresponding
implementation file (.cpp file) in your driver file (where main is), do not redefine those functions.
• Use the vector template in C++ (see https://www.programiz.com/cpp-programming/vectors) in
combination of the Talk struct defined in a4_talklib to store and handle the talk information. This
allows different numbers of talk entries and lets you practice using templates.
• Although C++ supports most of the operations in C, any operations we covered in the lecture
replacing C must be used. This includes: console I/O must be done by cin/cout (see iostream),
file I/O must be done by fin/fout (see fstream), text must be done by the string class, and
memory management must be done by new/delete.
• There must be no memory leaks (e.g., your program requests some memory but does not release
them all before it terminates). In CSIL you can use the Valgrind tool as described to check for that.
• Start with a fancy banner. There is no specific requirement besides it must include your name, 9-
digit SFU ID, and your SFU email address. Let your creativity shine, just nothing offensive.
• If a functionality (e.g., list, lookup) is requested by the user but no file has been loaded, the
program should print an error message telling the user that no talks file have been loaded and
prompt the user to do so.
• The sorting for Options 2&3 in Assignment 3 is done using the built-in qsort. Instead, use the builtin sort from C++ (see https://cplusplus.com/reference/algorithm/sort/).
*The entries are randomly generated using ChatGPT with a specific format and then lightly modified.
Hence, the content might not make sense and have very similar wording patterns – no need to worry.
And here are some hints for you to write your code:
• The interface is essentially a do-while loop where in each iteration it asks for an option and
determines what to do, with a repeating conditional of the terminating option has not been
inputted. It is a common approach for menu-based interfaces.
o Getting the user to input a valid input is exactly the same, with the repeating condition
being the input invalid (e.g., 0>userInput || userInput >=60).
Assignment 4 CMPT 125 Intro. To Computing Science & Programming II Spring 2023
Page 3 of 6 © Victor Cheung, 2023
• The built-in sort from C++ (defined in ) can sort items in different kinds of container
classes as long as they provide access to the items using an “iterator”, which is a common design
pattern in Object-Oriented Programming. Refer to our lecture examples and the reference link
above for details. Also pay attention to how the compare function pointer works.
• The way things are being read from the console and file is simplified with cin and fin. Besides the
>> operator, there is a getline function for strings. Use it like this: getline(cin, stringVariable), or
this after an int is read: getline(cin >> ws, stringVariable). You are encouraged to explore why.
Here are some sample input and output (you can assume user input is always valid):
Figure 1. Choosing an option without opening any file then opening an existing file.
Figure 2. Listing talks sorted by duration (only showing the first 2 here for space).
Figure 3. Looking up a talk but no entries in the list.
Assignment 4 CMPT 125 Intro. To Computing Science & Programming II Spring 2023
Page 4 of 6 © Victor Cheung, 2023
Figure 4. Adding a talk to the list (it’s the shortest so Option 2 shows it first).
Figure 5. Saving the entries to a file (77 entries were loaded at start, adding 1 makes it 78).
Include the function definitions corresponding to a4_talklib.hpp (and your helper functions, if any) in a
source file named as a4_talklib.cpp. Do the same for a4_talkList. Both the .hpp files are provided to help
you get started. They are adequate to complete this assignment, but if you want you can add/remove
functions as appropriate – as long as they fulfill all the requirements stated above.
Include your main function (and your helper functions, if any) in another source file named as
a4_talkLookupSystem.cpp. We call this the driver file because this is where the program starts.
To determine where to place a helper function, think about its purpose. If it provides functionality with
the Talk structs (e.g., create/clear Talks, compare Talks), it is a library function; if it provides functionality
of the program (e.g., print a fancy banner), it is a program function; and if it provides functionality that
directly accesses private members of the talkList, it should be a member function of talkList. Incorrectly
placing these functions will lead to mark deductions in the Coding Style category.
Coding Style [4 marks]
Your program should be properly indented, have clear and meaningful variable names (e.g., no singleletter variable names except loop iterators) and enough white space and comments to make it easy to
read. Named constants should be used where appropriate. Each line of code should not exceed 80
characters. White space should be used in a consistent manner.
Assignment 4 CMPT 125 Intro. To Computing Science & Programming II Spring 2023
Page 5 of 6 © Victor Cheung, 2023
Keep your code concise and efficient. If your code is unnecessarily long or inefficient (e.g., hard-code for
all possible cases, extraneous function calls), we might deduct marks. To help you to get into the habit of
good coding style, we will read your code and marks will be deducted if your code is not styled properly.
Using the Makefile and Other Supplied Files
The Makefile provided in this assignment is used by a command in the CSIL machines called “make” to
quickly compile your code. It is especially useful if you have multiple source files. To use it, type the
following command in the prompt (make sure you are in the directory with all the files of Assignment 4):
$ make test1
The example above illustrates how Question 1 is compiled into an executable called “test1” when using
the Makefile. Replace the “test1” with “test2”, “test3”, …etc. for other questions. You can then run the
executable by typing “./test1” to test your code for Question 1. If you make changes to your code, use the
make command again. You can also use “make all” if you want to compile all your code at once.
The header files are there to make the compilation work. Take a look at them for information about how
each function should work. You might have to modify them and you will have to submit them this time.
Submission
Submit only the 5 source files (a4_talklib.hpp, a4_talklib.cpp, a4_talkList.hpp a4_talkList.cpp,
a4_talkLookupSystem.cpp) to CourSys. Refer to the corresponding Canvas assignment entry for details.
Assignment late penalty: 10% per calendar day (each 0 to 24 hour period past due), max 2 days late.
Academic Honesty
It is expected that within this course, the highest standards of academic integrity will be maintained, in
keeping with SFU’s Policy S10.01, “Code of Academic Integrity and Good Conduct.” In this class,
collaboration is encouraged for in-class exercises and the team components of the assignments, as well
as task preparation for group discussions. However, individual work should be completed by the person
who submits it. Any work that is independent work of the submitter should be clearly cited to make its
source clear. All referenced work in reports and presentations must be appropriately cited, to include
websites, as well as figures and graphs in presentations. If there are any questions whatsoever, feel free
to contact the course instructor about any possible grey areas.
Some examples of unacceptable behavior:
• Handing in assignments/exercises that are not 100% your own work (in design, implementation,
wording, etc.), without a clear/visible citation of the source.
• Using another student's work as a template or reference for completing your own work.
• Using any unpermitted resources during an exam.
• Looking at, or attempting to look at, another student's answer during an exam.
• Submitting work that has been submitted before, for any course at any institution.
All instances of academic dishonesty will be dealt with severely and according to SFU policy. This means
that Student Services will be notified, and they will record the dishonesty in the student's file. Students
Assignment 4 CMPT 125 Intro. To Computing Science & Programming II Spring 2023
Page 6 of 6 © Victor Cheung, 2023
are strongly encouraged to review SFU’s Code of Academic Integrity and Good Conduct (S10.01) available
online at: http://www.sfu.ca/policies/gazette/student/s10-01.html.
Use of ChatGPT or Other AI Tools
As mentioned in the class, we are aware of them. I see them as helpers/tutors from which you can look
for inspiration. However, these tools are not reliable and they tend to be overly confident about their
answers, sometimes even incorrect. It is also very easy to grow a reliance to them and put yourself at risk
of not actually learning anything and even committing academic dishonesty. Other issues include:
• When it comes to uncertainty, you won’t know how to determine what is correct.
• If you need to modify or fine tune your answer, you won’t know what to do.
• You will not be able to learn the materials and thus will not ne able to apply what you learn in
situations where no external help is available, for example, during exams and interviews.
For introductory level courses and less sophisticated questions, it is likely that you’ll get an almost perfect
answer from these tools. But keep in mind if you can get the answer, everyone can also get the answer.
Bottomline is, if you ask these tools to give you an answer and you use the answer as yours, you are
committing academic dishonesty by claiming work that is not done by you as yours.
Note that different instructors might have different policies regarding the use of these tools. Check with
them before you proceed with assignments from other courses.