CSC 485H代写、代做Python编程设计

项目预算：开发周期：发布时间：要求地区：

University of Toronto, Department of Computer Science
CSC 485H/2501H: Computational linguistics, Fall 2023
Assignment 2
Due date: 23:59 on Friday, 3rd November, 2023.
Late assignments will not be accepted without a valid medical certificate or other documentation
of an emergency.
For CSC485 students, this assignment is worth 30% of your final grade.
For CSC2501 students, this assignment is worth 25% of your final grade.
• Read the whole assignment carefully.
• Type the written parts of your submission in no less than 12pt font.
• What you turn in must be your own work. You may not work with anyone else on any of
the problems in this assignment. If you need assistance, contact the instructor or TA for the
assignment.
• Any clarifications to the problems will be posted on the Piazza forum for the class. You will
be responsible for taking into account in your solutions any information that is posted there,
or discussed in class, so you should check the page regularly between now and the due date.
• The starter code directory for this assignment is accessible on Teaching Labs machines at
the path /u/csc485h/fall/pub/a2/. In this handout, code files we refer to are located in
that directory.
• When implementing code, make sure to read the docstrings as some of them provide important instructions, implementation details, or hints.
• Fill in your name, student number, and UTORid on the relevant lines at the top of each
file that you submit. (Do not add new lines; just replace the NAME, NUMBER, and UTORid
placeholders.)
0. Warming up with WordNet and NLTK (4 marks)
WordNet is a lexical database; like a dictionary, WordNet provides definitions and example
usages for different senses of word lemmas. But WordNet does the job of a thesaurus as well: it
provides synonyms for the senses, grouping synonymous senses together into a set called a synset.
But wait; there’s more! WordNet also provides information about semantic relationships beyond synonymy, such as antonymy, hyperonymy/hyponymy, and meronymy/holonymy. Throughout this assignment, you will be making use of WordNet via the NLTK package, so the first step is
to get acquainted with doing so. Consult sections 4.1 and 5 of chapter 2 as well as section 3.1 of
chapter 3 of the NLTK book for an introduction along with examples that you will likely find useful
for this assignment. You may also find section 3.6 is also useful for its discussion of lemmatization,
although you will not be doing any lemmatization for this assignment.
Make certain that you use Python 3 (python3). That is where NLTK lives on our machines.
You will need to import nltk. You may also need to nltk.download(’omw-1.4’).
(a) (1 mark) A root hyperonym is a synset with no hyperonyms. A synset s is said to have depth
d if there are d hyperonym links between s and a root hyperonym. Keep in mind that, because
synsets can have multiple hyperonyms, they can have multiple paths to root hyperonyms.
Implement the deepest function in q0.py that finds the synset in WordNet with the largest
maximum depth and report both the synset and its depth on each of its paths to a root hyperonym.1
(b) (2 marks) Implement the superdefn function in q0.py that takes a synset s and returns a
list consisting of all of the tokens in the definitions of s, its hyperonyms, and its hyponyms.
Use word_tokenize as shown in chapter 3 of the NLTK book.
(c) (1 mark) WordNet’s word_tokenize only tokenizes text; it doesn’t filter out any of the tokens. You will be calculating overlaps between sets of strings, so it will be important to
remove stop words and any tokens that consist entirely of punctuation symbols.
Implement the stop_tokenize function in q0.py that takes a string, tokenizes it using word_
tokenize, removes any tokens that occur in NLTK’s list of English stop words (which has
already been imported for you), and also removes any tokens that consist entirely of punctuation characters. For a list of punctuation symbols, use Python’s punctuation characters
from the string module (this has also already been imported for you). Keep in mind that
NLTK’s list contains only lower-case tokens, but the input string to stop_tokenize may
contain upper-case symbols. Maintain the original case in what you return.
1Hint: you may find the wn.all_synsets and synset.max_depth methods helpful.
2
1. The Lesk algorithm & word2vec (28 marks)
Recall the problem of word sense disambiguation (WSD): given a semantically ambiguous
word in context, determine the correct sense. A simple but surprisingly hard-to-beat baseline
method for WSD is Most Frequent Sense (MFS): just select the most frequent sense for each
ambiguous word, where sense frequencies are provided by some corpus.
(a) (1 mark) Implement the mfs function that returns the most frequent sense for a given word
in a sentence. Note that wordnet.synsets() orders its synsets by decreasing frequency.
As discussed in class, the Lesk algorithm is a venerable method for WSD. The Lesk algorithm
variant that we will be using for this assignment selects the sense with the largest largest number of
words in common with the ambiguous word’s sentence. This version is called the simplified Lesk
algorithm.
Algorithm 1: The simplified Lesk algorithm.
input : a word to disambiguate and the sentence in which it appears
best_sense ←− most_frequent_sense word
best_score ←− 0
context ←− the bag of words in sentence
for each sense of word do
signature ←− the bag of words in the definition and examples of sense
score ←− Overlap(signature, context)
if score > best_score then
best_sense ←− sense
best_score ←− score
end
end
return best_sense
Our version represents the signature and context each as bags (also known as multisets) of
words. Bags are like sets but allow for repeated elements by assigning each element with a nonnegative integer that indicates the number of instances of that element in the bag; this integer is
called multiplicity. Because of multiplicity, the bags A = {a,a,b}, B = {a,b,b}, C = {a,b}, and
D = {a,a,b,b} are all different. (This is not the case for sets, which do not allow multiplicity.) a
has multiplicity 2 in A and D but multiplicity 1 in B and C, while b has multiplicity 2 in B and D
but multiplicity 1 in A and C.
As with sets, each bag has associated with it a cardinality which is the sum of the multiplicities
of its elements; so A and B have cardinality 3 whileC has cardinality 2 and D has cardinality 4. The
intersection of two bags Y and Z is the bag where, the multiplicity of any element x is defined as the
minimum of the multiplicities of x in Y and in Z. For the bags defined above, C is the intersection
3
of A and B. The union is analogously defined using maximum instead of minimum: the bag D is
the union of A and B.
(b) (6 marks) In the lesk function, implement the simplified Lesk algorithm as specified in
Algorithm 1, including Overlap. Overlap(signature, context) returns the cardinality
of the intersection of the bags signature and context, i.e., the number of words tokens
that the signature and context have in common.
Use your stop_tokenize function to tokenize the examples and definitions.
Next, we’re going to extend the simplified Lesk algorithm so that the sense signatures are more
informative.
(c) (3 marks) In the lesk_ext function, implement a version of Algorithm 1 where, in addition to including the words in sense’s definition and examples, signature also includes
the words in the definition and examples of sense’s hyponyms, holonyms, and meronyms.
Beware that NLTK has separate methods to access member, part, and substance holonyms/
meronyms; use all of them.
Use stop_tokenize as you did for lesk.
(d) (2 mark) This extension should yield improvement in the algorithm’s accuracy. Why is this
extension helpful? Justify your answer.2
Beyond Overlap,there are other scores we could use. Recall cosine similarity from the lectures:
for vectors~v and ~w with angle θ between them, the cosine similarity CosSim is defined as:
CosSim(~v,~w) = cosθ =
~v ·~w
|~v||~w|
Cosine similarity can be applied to any two vectors in the same space. In the Lesk algorithm,
we compare contexts with sense signatures, both of which are bags of words. If, instead of bags,
we produced vectors from the relevant sources (i.e., the words in the sentence for the contexts and
the words in the relevant definitions and examples for the sense signatures), we could then use
cosine similarity to score the two.
Perhaps the simplest technique for constructing vectors from bags of words is to assign one
vector dimension for every word, setting the value for each dimension to the number of occurrences
of the associated word in the bag. So {a,a,b} might be represented with the vector
2 1
and
{a,b} with
1 1
. If we were comparing {new,buffalo,york} and {buffalo,buffalo,like},
we might use
1 0 1 1
and
2 1 0 0
, respectively.
(e) (4 marks) In the lesk_cos function, implement a variant of your lesk_ext function that
uses CosSim instead of Overlap. You will have to modify signature and context so that
they are vector-valued; construct the vectors from the relevant tokens for each in the manner
described above.
(Again, use stop_tokenize to get the tokens for the signature.)
2Hint: consider the likely sizes of the overlaps.
4
(f) (2 marks) In the lesk_cos_oneside function, implement a variant of your lesk_cos function that, when constructing the vectors for the signature and context, does not include words
that occur only in the signature. For example, if the signature has words {new,buffalo,york}
while the context has {buffalo,buffalo,like}, new and york would not be included; so
the signature might be represented with
1 0
and the context with
2 1
.
(Again, use stop_tokenize to get the tokens for the signature.)
(g) (3 marks) Compare how well lesk_cos_oneside performs compared to lesk_cos. Why do
you think this is the case? Justify your answer with examples.
(h) (1 mark) Suppose that, instead of using word counts as values for the vector elements, we
instead used binary values, so that {new,buffalo,york} and {buffalo,buffalo,like}
would be represented with
1 0 1 1
and
1 1 0 0
, respectively. This is a vector
representation of a set.
If we use CosSim for such vectors, how would this be related to the set intersection? (You do
not need to implement this.)
Finally, let’s try to incorporate modern word vectors in place of the bag of words–based method
above. Relatively simple models such as the skip-gram model of word2vec can be trained on large
amounts of unlabelled data; because of the large size of their training data, they are exposed to
many more tokens and contexts. Once trained, word vectors can be extracted from the model and
used to represent words for other tasks, usually bestowing substantial increases to performance.
They also seem to exhibit some interesting semantic properties; recall the example discussed in
class where if we take the vector for king, subtract the vector for man, add the vector for woman,
and then ask which existing word vector is closest to the result, the answer will be the vector for
queen. It stands to reason that incorporating these vectors might help improve the Lesk algorithm.
(i) (4 marks) In the lesk_w2v function, implement a variant of your lex_cos function where the
vectors for the signature and context are constructed by taking the mean of the word2vec
vectors for the words in the signature and sentence, respectively. Count each word once only;
i.e., treat the signature and context as sets rather than multisets.
(Again, use your stop_tokenize to get the tokens for the signature.)
You can run your implementations on the evaluation set that we provide by running python3
q1.py. This will skip any unimplemented functions and display scores for the implemented ones.
Report your scores in your written submission.
(j) (2 marks) Alter your code so that all tokens are lowercased before they are used for any of the
comparisons, vector lookups, etc. How does this alter the different methods’ performance?
Why?
(Do not submit this lowercased version.)
5
2. Word sense disambiguation with BERT (22 marks)
word2vec associates a vector with each word type. Newer models, such as ELMo, GPT, and BERT
instead produce vectors for each word token. Another way of saying this is that vector representations produced by the latter models are conditioned on context and will differ depending on the
context in which the word appears. Consider the two sentences Let’s play a game and Let’s see a
play. word2vec will produce the same vector for play in both cases even though they have different
senses. This is why you had to average all of the relevant vectors in the signature or sentence for
lesk_w2v rather than, for example, relying only on the vector for play. Clearly, there’s a parallel
to how ambiguous words can have their senses resolved only in context.
(a) (4 marks) Is context really necessary? Assuming all that is available are wordforms and
lemmata—no dependencies, semantic roles, parts of speech, etc.—can you give an example
of a sentence where word order–invariant methods such as those you implemented for Q1
will never be able to completely disambiguate? If so, what is the more general pattern, and
why is it impossible for the above methods to provide the correct sense for each ambiguous
word? Be clear about your reasoning.3
But BERT (as is the case with other contextual models) doesn’t produce the same vector for
every instance of a particular word sense; the same vector will be produced only in the exact
same context. So we cannot simply glance at the vector produced for an ambiguous word in order
to determine its sense. We might consider using BERT vectors in a similar manner as we did
the word2vec vectors for lesk_w2v above, taking the mean of the vectors to produce a vector
representation for a word sequence; this turns out to perform worse than any of the methods above.4
Instead, suppose that we had a vector associated with every sense. If the sense vectors are
related to corresponding word token vectors in some way, we could then compute similarities
between possible sense vectors for a particular word token and its corresponding contextual word
vector and then select the sense with the highest similarity. A simple method that works well is
to run the model (BERT, in our case) over each of the sentences in a sense-annotated training set.
We can gather the word tokens associated with all occurrences of a sense and take their average to
represent that sense.
(b) (10 marks) Implement gather_sense_vectors in q2.py to assign sense vectors as described above.
(c) (2 marks) In the docstring for gather_sense_vectors, we point out that sorting the corpus
by length before batching is much faster than leaving it as-is. Explain why this is the case.5
(d) (4 marks) Implement bert_1nn in q2.py to predict the sense for a word in a sentence given
sense vectors produced by gather_sense_vectors. Keep in mind the note in the docstring
about loop usage.
3Hint: re-read the preceding paragraph with this question in mind.
4Why?
5Hint: think about padding.
6
For this assignment, you will be using the BERT model, though the direct calls to it have been
implemented for you in given helper functions. Pay attention to the notes, etc. in q2.py, as they
will help with and fully specify proper usage.
Finally, beware that the version of word sense disambiguation in this assignment is restricted
compared to what would have to be done for the general case of disambiguating ambiguous words
in arbitrary sentences. In particular, the code you’ve written assumes that it is known which words
need to be disambiguated; the selection of ambiguous words in the sentence has already been done
for you.
(e) (2 marks) Think of at least one other issue that would come up when attempting to use the
code for this assignment to disambiguate arbitrary sentences. You may consider either the
Lesk variants from Q1 or the BERT-based method here (or both).
7
Notes
• Running the code for Q1 should not take too long, but if you would like to iterate faster,
caching tokens for signatures and contexts can be an effective speedup.
• The BERT code for Q2 can be a little slow and memory-intensive, so it’s recommended that
you run it on a GPU. (That said, it should run on CPU in less than an hour or so, so it’s definitely viable to do so if needed or preferred.) The code we’ve provided for this assignment
will automatically use the GPU if it’s available; you should never have to specify the device
of a Tensor or call .clone().detach() on one. Similar to A1, you can run your Q2 code
on a GPU-equipped machine via ssh to teach.cs.toronto.edu; use the gpu-run-q2.sh
script to do so. As a reminder, the GPU machines are shared resources, so there are limits on
how long your code is allowed to run.
• Do not alter the function signatures (i.e., the names of the functions or anything about the
parameters that they take), and do make sure that your implementations of the functions
return what the functions are specified to return (i.e., no extra return objects). Also, make
sure your submitted files are importable in Python (i.e., make sure that ‘import q1’ doesn’t
yield errors, and likewise for the other questions/files).
• Do not add any extra package or module imports. If you really would like to use a certain
package or module, ask on the Piazza forum with a brief justification.
• You may add any helper functions, global variables, etc. that you wish to the files for each
question (q0.py, q1.py, etc.), but do not allow your code to become overly convoluted and
make sure it is still readable so that we can trace and understand your logic. You will not
be submitting the other Python files, but avoid making changes to them, as your code’s
behaviour will be evaluated against those files as they are in the starter code.
8
What to submit
Submission is electronic and can be done from any Teaching Labs machine using the submit
command:
$ submit -c -a A2 ...
where is csc485h or csc2501h depending on which course you’re registered in, and

to are the n files you are submitting. The files you are to submit are
as follows:
• a2written.pdf: a PDF document containing your answers as applicable for each question.
This PDF must also include a typed copy of the Student Conduct declaration as on the last
page of this assignment handout. Type the declaration as it is and sign it by typing your
name.
• q0.py: the (entire) q0.py file with your implementations filled in.
• q1.py: the (entire) q1.py file with your implementations filled in. Again, do not include the
alterations that you implement for question 1h.
• q2.py: the (entire) q2.py file with your implementations filled in.
9
CSC 485H/2501H, Fall 2023: Assignment 2
Family name:
Given name:
Student #:
Date:
I declare that this assignment, both my paper and electronic submissions, is my own work, and
is in accordance with the University of Toronto Code of Behaviour on Academic Matters and the
Code of Student Conduct.
Signature: